How-To: Reset Wi-Fi access point
Here is how to reset the access point:
- Locate the big blue Netsurion firewall in the back office.
- Find LAN7 and LAN8 ports on the firewall (they are labeled on the front of the device, underneath the cables)
- Follow the cables plugged into LAN7 and LAN8. One cable will go directly into the printer. The other cable is the one you want to follow.
- Follow the cable until you find a small box with 2 ethernet cords coming out of it, one will say POE and the other will say LAN
- Disconnect that small box from the power outlet and wait 30 seconds.
- Re-plug it back into power.
Monitor to see if the Wi-Fi comes back up, it should after a few minutes.